Chip Led Cob 100w Suppliers – Wholesale cob led chips 50w-1200w for high power led fixture – CAS-Ceramic
Chip Led Cob 100w Suppliers – Wholesale cob led chips 50w-1200w for high power led fixture – CAS-Ceramic Detail:
What is the difference between LED and K-COB LED?
LED (light-emitting diode) is now a very common technology today. With the advantages of low energy consumption, long life-span, and instant start-up, the fixture with LED light source has replaced the traditional MHL (metal halide lamp) and HPS(high-pressure sodium) lamp on the market gradually.
LED is used to divide into SMD(surface mounting device) and COB(chip on board), the biggest difference between LED COB and SMD is that COB has times more diode in the same PCB surface. It means the COB chip has a higher light density, directivity, and enhanced optical control. And this is the reason why COB is popular in high mast lighting areas such as stadium lighting, search lighting, port lighting .,etc.
The application of high power cob led chips
LM 80 TEST REPORT AND 4 CORE PATENT CERTIFICATE
Do K-COB get hot?
K-COB LED CHIPS has patented dual-channel heat sink technology. The phosphor ceramic provides additional heat conductive channels. The heat dissipates from the top of the phosphor ceramic and the bottom of the PCB board. The K-COB led chips with high reliability and high performance of light intensity due to the heat sink are better than common led chips.
We separate two main heat source of LED diode and phosphor by this dual heatsinking channel design. And it helps to the reduction of chip junction temperature effectively.
Specification
Item No. |
Rated Power(W) |
Forward Voltage Vf(V) |
Rated Currency IF(mA) |
Max Input currency(mA) |
CRI(Ra) |
Color Temperature(K) |
Efficiency Im/w Based on 70ra |
XY-L5640 |
400 |
124 |
3000 |
3150 |
70/80/90 |
2000-6500 |
165lm/w |
XY-L5650 |
500 |
124 |
3700 |
4050 |
70/80/90 |
2000-6500 |
160lm/w |
XY-L5660 |
600 |
124 |
4300 |
4800 |
70/80/90 |
2000-6500 |
155lm/w |
XY-L5670 |
700 |
124 |
5300 |
5500 |
70/80/90 |
2000-6500 |
150lm/w |
DIMENSIONS DRAWING
*Size & Circuit is customizable based on the requirement
How do you wire LED COBs?
1. Apply an appropriate amount of thermal grease to the bottom of the lamp housing
2. Put the lamp bead on the place where thermal grease is applied
3. Weld the wires to the positive and negative poles of the lamp beads
4. Put the corresponding bracket on the lamp bead, (note: the yellow part cannot be pressed)
5. Fix the bracket with screws
6. Screw the lamp cover of the lamp, and the installation is finished.
What’s the price of K-cob led chips?
Different from traditional silica gel COB and SMD light sources, phosphor ceramic COB is a new generation of light sources with higher light intensity and safer and more reliable quality. Since K-COB LED adopts self-developed technology, we already have a mature technology and own serval production line, compared with international big brands cree, bridglux, citizen, our cost performance is higher. If you need, you can leave us a message, our lighting experts will give you a professional reply within 24 hours.
K-COB LED CHIPS RELATED PRODUCTS
Product detail pictures:
Related Product Guide:
Our portfolio includes high-power Phosphor ceramic led chips, stadium lighting, led searchlights, led tunnel lights, high mast lightings, street lighting, floodlighting, and fishing lights that can be broadly applied in scenarios such as commercial places and outdoor lighting, etc. Chip Led Cob 100w Suppliers – Wholesale cob led chips 50w-1200w for high power led fixture – CAS-Ceramic , The product will supply to all over the world, such as: Iraq, Mecca, Burundi, Fujian CAS-Ceramic Optoelectronics Technology Co.,Ltd reduces energy use by 60%-70%.We are phosphor ceramic COB manufacturer.The highly efficient, lighting technology allows higher wattage or other traditional street lighting fixtures to be replaced with more effective LED fixtures
By Maggie from Kuwait - 2018.08.12 12:27
This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
By Cherry from Germany - 2017.01.11 17:15